Showing posts with label reader. Show all posts
Showing posts with label reader. Show all posts

Sunday, June 24, 2012

Reader Control

There was, of course, the problem of control. A touchscreen display would've been great, but the laptop wasn't that advanced.

As you probably noticed from the Introduction, a touchpad was the chosen controller. Several pointing and control devices had been considered in addition to a touchpad, including some sort of keypad, a set of scroll wheels, a pointing stick, and a trackball. The touchpad won out based on flexibility and ease of integration with the display. A different choice may work better for you.

A pointing stick was high on the list based on size. It'd be smaller than about anything, but I couldn't find one that could be plugged in and used like a mouse. It would have had to be integrated into the display or some housing would have had to have been contrived, and arrangements would have been needed to wire it into the mouse interface on the base. On the other hand, USB and PS/2 touchpads were readily available and one could be attached to an edge of the display housing. That left the problem of figuring out a good way to attach it.

The Velcro came from a local fabric store. A nice older lady there asked what I was making with it, to which I smiled and said, “A computer.” She responded with silence and strange look...
In the end, I chose Velcro. Permanent attachment to the housing would have been easy enough, but temporary attachment would permit moving the pad to various locations as desired. Black-colored, soft, loop Velcro was attached around the three flat sides of the display frame and the matching rough, hook Velcro was attached on the back of the touchpad. The result provided a highly flexible solution with a fairly clean look.

I figured that, if something better came along, the touchpad could easily be replaced with a different controller of comparable size that could be plugged into an available USB or PS/2 port. But later in the project the touchpad turned out to be a very good choice with a few unanticipated advantages over other controllers.

Monday, April 2, 2012

Introduction

If you have an old laptop just collecting dust and want to use it for something, one possibility is to mod it into a tablet-like ebook reader. While the resulting reader isn't really portable and has to boot up when turned on, it doesn't need to be recharged and works well when used at a favorite reading location, like in bed or a particular comfy chair.

The reader is a fairly inexpensive project and can provide a display larger than the largest commonly available tablets and readers currently on the market. But don't do it for the cost. Depending on what you want to read and your technical prowess, there are cheaper solutions. Do it for the fun, for the challenge, or because you want a really big reader.

The essence of the mod is to detach the laptop's display from the base and tether it to the base with a lengthy cable. With all of the power, processing, and peripheral connection hardware in the base, the tethered display serves as a large, light-weight tablet.

Over time, I'll work to provide some details of various aspects of the device. If there's a particular aspect you're more interested in, post a question or comment and I'll aim to address your interest before others that no one's mentioned.